Appli-Tec technical specialists personally respond to each RFQ, email or phone call.

Choosing the Right Epoxy or Polyurethane: It Depends on Your Application Challenge

by on August 14, 2026

appli-tec-7300-pcb

Appli-Thane 7300 polyurethane used for a bonding application that required maximum thermal conductivity.

Aerospace, defense, and industrial engineers from around the world contact us because they need help choosing an adhesive for their complex application.

We regularly hear from engineers that they’ve been working for months to solve a specific industrial or environmental challenge but can’t find the adhesive material they need.

Or, they’ve done research and know they need a softer polyurethane for an aerospace application, but they also need high thermal conductivity (and low outgassing, too).

Whether to choose an epoxy or polyurethane depends on several factors.

In general, epoxies are hard, rigid, have higher bond strength, and are suitable for higher temperature applications.

Polyurethanes are softer, more flexible, have lower bond strength, and are suitable for lower temperature applications (sub-ambient).

Both epoxies and polyurethanes are modified to be thermally conductive, which also lowers the CTE (coefficient of thermal expansion). However, if the substrate and the adhesive have significant CTE mismatch, a choice needs to be made:

  • Use a a high bond strength epoxy to withstand the stresses without failure
  • Use a flexible polyurethane to absorb the stresses

The choice depends on the operating environment and cure conditions of the part.

In the chart below, we’ve listed several application requirements, and the adhesive properties we consider when advising which formulation is best for you. Application needs can include one requirement only or several.

  • 5000 Series is epoxy based.
  • 7000 Series is polyurethane based.
Application Requirement Choose 5000 Series When… Choose 7000 Series When…
Operating Temperature High Tg needed (high-temp environments) Tg < 0°C needed (cold environments, thermal cycling)
Stress/CTE Mismatch Structural rigidity is more important High stress relief critical; mismatched CTE
Thermal Conductivity (W/mK) 1.0-4.3 W/mK range (5390 reaches 4.3) 0.84-2.5 W/mK range
Work Life Needs 0.5-48 hrs available (5235 has 48 hrs) 1.5-8 hrs (7308 has 8 hrs)
Electrical Conductivity Need electrically conductive epoxy (5200/5230/5235) Need electrically isolating only
Space/Aerospace Apps Low outgassing + higher Tg (5336, 5302) Low outgassing + flexibility (7000 series)
Field Repair Need higher final Tg (5381 RT cure) Need reworkability + flexibility
EV/Battery Apps Higher thermal dissipation critical (5380, 5390) Cell expansion tolerance critical (7000 series)
Automation/High-Volume Faster cure, structural (5340, 5200) Flexibility + moderate cure
Process Ease Dual cartridge/1:1 ratios available Frozen syringes mainly

Need technical advice or help choosing a material? Contact us!

Appli-Tec team members personally respond to each RFQ, email, and phone call we receive. Even if you’ve reviewed our Materials List and are confident 5390 Epoxy will solve your challenge, one of our technical specialists will reach out to better understand your business and application.

What we want to know:

  • The challenge you’re trying to solve
  • What you’ve tried in the past (and why it didn’t work)
  • Your “must have” requirements (W/mK, low outgassing, electrically conductive / isolative), etc.
  • Whether or not you have an ultra-low temperature freezer

If you don’t have a freezer, a 1-part frozen epoxy or urethane won’t work for you. We’ll then suggest a 2-part adhesive or ask if you’d like to rent one of our ultra-low temperature benchtop freezers.

Need samples in a hurry? Consider our Stocked Parts.

Stocked parts are available as pre-mixed and frozen (PMF) in 5 cc syringes or room temperature stable 2-Part Kits, with standard labels. The benefit of stocked parts is they ship within 5 business days on receipt of PO – versus 15 to 20 days for normal orders.

Currently, we have stock for the following formulations:

Stocked Adhesives
5390 Epoxy Appli-Thane® 7300
5380 Epoxy Appli-Thane® 7308
5340 Epoxy Appli-Thane® 7340
5336 Epoxy Appli-Thane® 7125
5108 Epoxy Appli-Thane® 7800
5051 Epoxy Appli-Thane® 7810

Yes, we ship worldwide.

Appli-Tec can ship temperature- and light-sensitive materials all over the world. However, what we ship (frozen 1-part or non-reactive 2-part) depends on time-in-transit and delivery location.

We’ll confirm ship dates with you to ensure frozen syringes won’t be left on your loading dock due to a local holiday, you being out of office, or a late Friday afternoon delivery.

From technical adhesive specialists who understand your application challenges to our in-house processes and procedures designed to deliver the most precise formulations, Appli-Tec is your number one choice for the very best precision-mixed and packaged adhesives.

Alisha Adams

Alisha Adams is the Research and Development Lead for Appli-Tec. Her expertise includes formulating epoxy and acrylate adhesives for the electronics market.

See more articles by Alisha »

General Inquiry

I have a technical question, need an SDS, etc.

Email Customer Service

New Applications

I want to discuss my application challenges, order samples, or place a first-time order.

Email a Technical Specialist

Existing Applications

I need to reorder an existing part number, I have a BOM/Spec.

Email Inside Sales