Appli-Tec technical specialists personally respond to each RFQ, email or phone call.

Optically Clear Adhesives

Ideal for aerospace and industrial applications

Encapsulating a circuit board to protect it from environmental exposure.

Delivering proven performance, Appli-Tec Optically Clear adhesives can be found in aerospace applications, such as telescopes and satellite imaging systems, where optical clarity is critical under harsh conditions and extreme temperatures.

Engineers also use our adhesives for environmental applications subjected to UV exposure or chemicals and solvents.

The adhesive materials listed below range from our highest Refractive Index to the lowest. Each material is resistant to yellowing and, depending on formulation, can be used for assembling components, protecting optics, or encapsulating LEDs.

Don’t see what you need? Check our Adhesive Materials & TDS page or call 603-685-0500.


Materials that solve your optics application challenges

Appli-Thane® 7810
Refractive Index: 1.585

Perfect for optics that can’t tolerate stress on the bondline. A free-flowing polyurethane, Appli-Thane 7810 features low hardness, good flow and wetting, and is easily reworkable. The material meets NASA’s low outgassing requirements.

Key Features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): Yes
  • Applications: Potting, Staking, Encapsulation
  • Two-part Kit: No, Pre-Mixed Frozen (PMF) only
  • RoHS Compliant

5051 Epoxy
Refractive Index: 1.56

Ideal for fiber optic applications. An optically clear epoxy, 5051 features low viscosity and low outgassing. The material bonds well to most substrates such as metals, glass, ceramics, and most plastics.

Key features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): Yes
  • Applications: Bonding, Potting, Encapsulation
  • Two-part Kit: Yes, and Pre-Mixed Frozen (PMF)
  • RoHS Compliant

5070 Epoxy
Refractive Index: 1.54

Free flowing, for potting and underfill applications. A higher viscosity version of 5051, 5070 Epoxy features higher strength and a lower refractive index. The material bonds well to most substrates such as metals, glass, ceramics, and most plastics.

Key features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): Yes
  • Applications: Bonding, Potting, Encapsulation
  • Two-part Kit: No, Pre-Mixed Frozen (PMF) only
  • RoHS Compliant

5032 Epoxy
Refractive Index: 1.54

A low viscosity, optically clear epoxy. 5032 features a long work life and room temperature cure. Its low viscosity and Newtonian behavior make this an excellent material to wick into confined areas. The material bonds well to most substrates such as metals, glass, ceramics, and most plastics.

Key features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): No
  • Applications: Bonding, Potting, Encapsulation
  • Two-part Kit: Yes, and Pre-Mixed Frozen (PMF)
  • RoHS Compliant

5041 Epoxy
Refractive Index: 1.523

Ideal for bonding delicate substrates. Formulated to combine low viscosity with controlled wicking. 5041 is more flexible than typical brittle epoxies, resulting in tougher bonds, allowing this epoxy to absorb thermal and mechanical stress.

Key features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): Yes
  • Applications: Bonding, Optics
  • Two-part Kit: No, Pre-Mixed Frozen (PMF) only
  • RoHS Compliant

6120 UV Acrylate
Refractive Index: 1.154

LED curable acrylate. A clear, low viscosity, free flowing material, 6120 is a 100% solids, electrically isolating, and cures with a 385nm LED bulb or metal halide system. The material is perfect for tacking optical components in place, such as lenses, prisms, and waveguides.

Key features:

  • Electrically Insulative: Yes
  • NASA Low Outgassing (ASTM E595): No
  • Applications: Bonding, Potting
  • Two-part Kit: No, One-part RT stable
  • RoHS Compliant

General Inquiry

I have a technical question, need an SDS, etc.

Email Customer Service

New Applications

I want to discuss my application challenges, order samples, or place a first-time order.

Email a Technical Specialist

Existing Applications

I need to reorder an existing part number, I have a BOM/Spec.

Email Inside Sales