Now hiring! View our Open Positions
Ideal for aerospace applications as it meets NASA’s outgassing requirements. The cured material’s ability to not crack or harm bonded rigid components during thermal cycling is a major plus. Appli-Thane® 7300 is also used in manufacturing and automated dispensing applications due to its 4-hour pot life. Provides best-in-class thermal conductivity for applications requiring aggressive heat dissipation of components.
Work Life | 4 hours @ 25°C |
---|---|
Viscosity | Paste @ 25°C |
Shelf Life | 6 months @ -40°C 9 months @ -60°C |
2 hours @ 96°C 4 hours @ 72°C 2 weeks @ 25°C
Based on cure of 2 hours @ 96°C
Color | Blue |
---|---|
Shore A Hardness | 95 |
Shore D Hardness | 45 |
Glass Transition Temp (°C) | -40 |
Density (g/cc) | 2.8 |
Lap Shear 2024T3 Clad (psi) | 500 |
Tensile Strength (psi) | 450 |
Tensile Modulus (psi) | 9,500 |
Compressive Strength (psi) | 1,400 |
Compressive Modulus (psi) | 14,500 |
Elongation (%) | 5 |
Poisson’s Ratio | 0.38 |
Based on cure of 2 hours @ 96°C
Dielectric Constant | 16 @ 10 kHz 14 @ 100 kHz 11 @ 1 MHz |
---|---|
Dissipation Factor | 0.00 @ 10 kHz 0.07 @ 100 kHz 0.18 @ 1 MHz |
Dielectric Strength (volts/mil) | 650 |
Volume Resistivity (ohm-cm) | 1.0E 13 @ 500 VDC |
Based on cure of 2 hours @ 96°C
CTE below Tg (ppm/°C) | 25 |
---|---|
CTE above Tg (ppm/°C) | 75 |
Glass Transition Temp (°C) | -40 |
Operating Temp. Range (°C) | -100 to 160 |
Thermal Conductivity (W/mK) | 2.5 |
Based on cure of 2 hours @ 96°C
TML (%) | 0.19 |
---|---|
CVCM (%) | 0.03 |
WVR (%) | 0.04 |
Based on cure of 2 weeks @ 25°C
TML (%) | 0.12 |
---|---|
CVCM (%) | 0.01 |
WVR (%) | 0.03 |
Velocity (m/s) | 2,145 |
---|---|
Impedance (MRayles) | 6.28 |
Loss (dB/cm-MHz) | -16.5 |
Density (g/cc) | 2.8 |
The data contained herein is provided for informational purposes only and are believed to be reliable. APPLI-TEC does not guarantee suitability of this product for any resultant application or freedom from patent infringement. Furthermore, APPLI-TEC disclaims any liability for incidental and consequential damages of any kind including but not limited to lost profits.
Whether you need a quote or you have questions about material availability, we can help.