0148 Polysulfide Adhesive

Designed for areas in contact with aircraft fuel, lubricants

0148 is a grey, one‐component, polysulfide adhesive specifically designed for staking and bonding applications on integral fuel tanks and pressurized cabins. This product can also be used in any area where contact with aircraft fuel, lubricants, oil, water, and weather is common and resistance to those environments is required. 0148 is certified to AMS‐S‐8802, Type 2, Class B‐2 and HMS 16‐1985, Compound IV, Class 2 specifications and can be cured at either room or elevated temperatures. This material will bond well to most substrates such as metals (including aluminum, magnesium, titanium, and steel), glass, ceramics, and most plastics and is offered in very user‐friendly packaging.

Uncured

Pot Life2 hours
ViscosityPaste
Shelf Life6 months @ < ‐40°C

Cure Options

4 hours @ 74°C 16 hours @ 66°C 72 hours @ 25°C

Cured Properties

Based on cure of 4 hours @ 74°C

ColorGrey
Shore A Hardness51
Lap Shear 2024T3 Clad (psi)450
Density (g/cc)1.6
% Shrinkage Linear0.3

Electrical Properties

Based on cure of 4 hours @ 74°C

Volume Resistivity (ohm‐cm)2.6E 10 @ 500 VDC

Thermal Properties

Based on cure of 4 hours @ 74°C

Glass Transition Temp (°C)‐50
Degradation Temp. (°C)250

Key Features

  • AMS‐S‐8802, Type 2, Class B‐2
  • Bonds Well to Most Substrates
  • HMS 16‐1985, Compound IV, Class 2
  • Resistant to Fuel, Lubricants, Water and Weather
  • Room or Elevated Temperature Cure
  • User‐friendly Packaging
  • √ RoHS Compliant

The data contained herein is provided for informational purposes only and are believed to be reliable. APPLI-TEC does not guarantee suitability of this product for any resultant application or freedom from patent infringement. Furthermore, APPLI-TEC disclaims any liability for incidental and consequential damages of any kind including but not limited to lost profits.

Rev H
6/26/2024

General Inquiry

I have a technical question, need an SDS, etc.

Email Customer Service

New Applications

I want to discuss my application challenges, order samples, or place a first-time order.

Email a Technical Specialist

Existing Applications

I need to reorder an existing part number, I have a BOM/Spec.

Email Inside Sales