5010 Epoxy

An ideal epoxy for operating at elevated temperatures

5010 is an amber, electrically isolating, precision mixed, degassed, and frozen epoxy. It bonds well to most substrates such as glass, plastics, and ceramics. This material changes color upon cure to a dark red color. This material is specifically designed to have a long pot life and a high glass transition temperature making this epoxy ideal for operating at elevated temperatures. 5010 is resistant to fuel, lubricants, water, and weather and features a low viscosity and user-friendly packaging. It is also available in room temperature stable two part kits.

This product will exotherm if cured at high temperatures in masses greater than 5 grams. Contact Appli-Tec for step cure instructions if curing in larger masses.


Color MixedAmber
Color Part AClear Pale Yellow
Color Part BAmber
Viscosity Mixed @ 25oC5000 cPs
Viscosity Part A6,500 cPs
Viscosity Part B4,000 cPs
Thixotropic Index1.0
Shelf Life Unmixed @ RT9 Months
Shelf Life Mixed @ -40°C9 Months
Mix Ratio A:B96:4 Parts By Weight

Cure Options

16 hours @ 25°C + 1 hour @ 120°C 16 hours @ 25°C + 3 hours @ 100°C 16 hours @ 25°C + 5 minutes @ 150°C

Cured Properties

Based on cure of 1 hour @ 120°C

ColorDark Red
Shore D Hardness85
Glass Transition Temp (°C)130
Density (g/cc)1.2
Lap Shear 2024T3 Clad (psi)2,500

Electrical Properties

Based on cure of 1 hour @ 120°C

Volume Resistivity(ohm-cm) 4.7E 16 @ 500 VDC

Thermal Properties

Based on cure of 1 hour @ 120°C

Glass Transition Temp (°C)130
Degradation Temp. (°C)300

Outgassing Properties

Based on cure of 1 hour @ 120°C

TML (%)0.46
CVCM (%)0.02
WVR (%)0.26

Acoustic Properties

Based on cure of 1 hour @ 120°C

Velocity (m/s)2,644
Impendance (MRayls)3.23
Loss (dB/cm-MHz)-4.74
Density (g/cc)1.22

Key Features

  • Bonds Well to Most Substrates
  • Color Darkens When Cured
  • High Glass Transition Temperature
  • High Temperature Resistant
  • Long Pot Life
  • Listed on NASA Low Outgassing Website
  • Resistant to Fuel, Lubricants, Water and Weather
  • User‐friendly Packaging

The data contained herein is provided for informational purposes only and are believed to be reliable. APPLI-TEC does not guarantee suitability of this product for any resultant application or freedom from patent infringement. Furthermore, APPLI-TEC disclaims any liability for incidental and consequential damages of any kind including but not limited to lost profits.

Rev H

General Inquiry

I have a technical question, need an SDS, etc.

Email Customer Service

New Applications

I want to discuss my application challenges, order samples, or place a first-time order.

Email a Technical Specialist

Existing Applications

I need to reorder an existing part number, I have a BOM/Spec.

Email Inside Sales