0278 Urethane Adhesive

Space flight grade; Meets NASA's outgassing requirements

0278 is a transparent yellow, one‐component, unfilled, electrically isolating, space flight grade, precision mixed, degassed, and frozen urethane adhesive. It features low thermal conductivity and can be cured at either room or elevated temperatures. 0278 bonds well to most substrates such as metals, glass, ceramics, and most plastics. 0278 will provide excellent resistance when exposed to high temperatures and high humidity.


Work Life @ 25°C30 minutes
Viscosity @ 25°C9,500 cPs
Shelf Life3 weeks @ ‐40°C 3 months @ ‐60°C

Cure Options

8 hours @ 93°C 14 hours @ 38°C 7 days @ 25°C

Cured Properties

Based on cure of 8 hours @ 93°C

ColorLight Yellow
Shore A Hardness54
Glass Transition Temp (°C)‐70
Density (g/cc)0.97
Lap Shear 2024T3 Clad (psi)700

Electrical Properties

Based on cure of 8 hours @ 93°C

Dielectric Strength (volts/mil)370
Volume Resistivity (ohm‐cm)1.0E 15 @ 500 VDC

Thermal Properties

Based on cure of 8 hours @ 93°C

Glass Transition Temp (°C)‐70
Thermal Conductivity (W/mK)0.2

Outgassing Properties

Based on cure of 14 hours @ 38°C

TML (%)0.85
CVCM (%)<0.01
WVR (%)0.07

Acoustic Properties

Velocity (m/s)1,624
Impedance (MRayls)1.567
Loss (dB/cm‐MHz)‐5.1
Density (g/cc)0.97

Key Features

  • Bonds Well to Most Substrates
  • Electrically Isolating
  • Short Pot Life
  • Meets NASA Outgassing Requirements
  • Room or Elevated Temperature Cure
  • User‐friendly Packaging

The data contained herein is provided for informational purposes only and are believed to be reliable. APPLI-TEC does not guarantee suitability of this product for any resultant application or freedom from patent infringement. Furthermore, APPLI-TEC disclaims any liability for incidental and consequential damages of any kind including but not limited to lost profits.

Rev G

General Inquiry

I have a technical question, need an SDS, etc.

Email Customer Service

New Applications

I want to discuss my application challenges, order samples, or place a first-time order.

Email a Technical Specialist

Existing Applications

I need to reorder an existing part number, I have a BOM/Spec.

Email Inside Sales